Products from 3M Deutschland GmbH
![3M Deutschland GmbH](https://www.windsourcing.com/media/image/17/40/91/3M_800x800.jpg)
3M Deutschland GmbH has been a supply partner of WINDSOURCING.COM for rotor blade repair products and other wind turbine-related products for many years:
- 3M erosion protection for rotor blades
- 3M™ Wind Protection Tapes
- W2600 3M™ Wind Protection Tape Edge Sealer
- W9900 3M™ Wind Tape and Residue Remover (TARR) W9900
- W9910 3M™ Wind Tape Adhesion Promoter W9910
- 3M™ Wind Blade Protection Coatings and Accessories
- 3M™ Wind Blade Protection Coating W4600 and W4601
- 3M™ Wind Structural Adhesives and Accessories
- 3M Acryclic Foam Tapes and 3M™ Premium Electrical Tapes
No results were found for the filter!
SKE 4F is a semi-rigid, cross-linked modified Polyolefin heatshrink 4-way cable breakout boot with hot melt adhesive. Min. shrink temperature is 120°C, operating temperature is -30°C to +135°C. RoHS compliant and halogen free. Good corrosion resistance
SKE 4F is a semi-rigid, cross-linked modified Polyolefin heatshrink 4-way cable breakout boot with hot melt adhesive. Min. shrink temperature is 120°C, operating temperature is -30°C to +135°C. RoHS compliant and halogen free. Good corrosion resistance.
SKE 4F is a semi-rigid, cross-linked modified Polyolefin heatshrink 4-way cable breakout boot with hot melt adhesive. Min. shrink temperature is 120°C, operating temperature is -30°C to +135°C. RoHS compliant and halogen free. Good corrosion resistance
3M™ Cold Shrink End Cap EC-1 is our closed-end, tubular EPDM rubber sleeve which is factory expanded and loaded onto a removable core. It resists acid, alkalis and ozone, and water. Seals tight, retains resiliency and pressure even after prolonged years of aging and exposure.
3M™ Cold Shrink End Cap EC-2 is our closed-end, tubular EPDM rubber sleeve which is factory expanded and loaded onto a removable core. It resists acid, alkalis and ozone, and water. Seals tight, retains resiliency and pressure even after prolonged years of aging and exposure.
3M™ Cold Shrink End Cap EC-3 is our closed-end, tubular EPDM rubber sleeve which is factory expanded and loaded onto a removable core. It resists acid, alkalis and ozone, and water. Seals tight, retains resiliency and pressure even after prolonged years of aging and exposure.
3M™ Cold Shrink End Cap EC-4 is our closed-end, tubular EPDM rubber sleeve which is factory expanded and loaded onto a removable core. It resists acid, alkalis and ozone, and water. Seals tight, retains resiliency and pressure even after prolonged years of aging and exposure.
HDCW is a thermally stabilised cross linked weather resistant polymeric wraparound sleeve with hot melt adhesive. The outer surface has thermocromic paint, which changes the colour after reaching the right heatshrink temperature. RoHS compliant and halogen free. Good chemical resistance
HDCW is a thermally stabilised cross linked weather resistant polymeric wraparound sleeve with hot melt adhesive. The outer surface has thermocromic paint, which changes the colour after reaching the right heatshrink temperature. RoHS compliant and halogen free. Good chemical resistance
Last viewed wind turbine spare parts and repair material