Internal extractor
Ready for shipment in 6 workdays
- Item number:
- WS03608013480
- Manufacturer number:
- 1.30/4
- Weight:
- 0.2 kg
Internal extractor
For extremely-tightly-packed ball bearings, bearing races, bushings, and shaft seals Simmering®, Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extracted. The counter-support brace is then added. Both feet must be aligned parallel to the spindle to ensure rigidity., The design can vary from the image, Can be used with either sliding hammer or counter-support brace
Features:
- Country of origin: Germany
- Customs tariff number: 82055980
- Contents (Qty of pieces): 1
- Total width: 28 mm
- Total height: 28 mm
- Net weight: 0,2 kg
- 1000 V insulated: No
- VDE certified: No
- 3D data available: No
- Width across flats [mm]: 13 mm
- reversible arms available: No
- Clamping bracket available: No
- Total length: 123 mm
- Spread range: 19-25 mm
- Connecting thread: M10
- Slide Hammer: 1.35/2
- Support: 1.36/1