Coil Spring Pre-Compressor
Ready for shipment in 6 workdays
- Item number:
- WS03603434419
- Manufacturer number:
- KL-0029-200 K
- Weight:
- 9.7 kg
This unique special device allows a simple reduction of the overall suspension strut length by clamping together and thus favours a considerably faster removal and installation of McPherson suspension struts, especially on vehicle axles with strut clamping holes., Time-consuming operations such as loosening the cardan shaft, the axle guide, guide rod and tie rod joints as well as wheel alignment are completely eliminated., Pros: • High time and cost savings, • No need to loosen the axle guide, • No need to loosen the cardan shaft, • No need to loosen the tie rod end or the guide joint, • No wheel alignment required, • Can be used regardless of spring shape or spring pitch, • All individual parts available as spare parts
Features:
- Country of origin: Germany
- Customs tariff number: 82057000
- Contents (Qty of pieces): 3
- Total width: 500 mm
- Total height: 175 mm
- Total depth: 420 mm
- Net weight: 2,9 kg
- 1000 V insulated: No
- VDE certified: No
- Parts list (Text):
1x KL-0029-200 - Aus- und Einbauhilfe für McPherson Federbeine
1x KL-0029-1090-1 A - Schaumstoffeinlage
1x KL-0029-2090 - Kunststoffkoffer
- Target groups: Automotive
- Suitable for: Suitable for McPherson strut assemblies, in combination with vehicle-specific accessory kits.
- Required accessories: KL-0029-1.. - Upgrade Kits
- Clamping width (min.): 250 mm
- Clamping width (max.): 410 mm
- Drive connector hexagon: 27 mm
- Storage: in a case
- Note: The removal and mounting aid must not be used for the disassembling of suspension struts.
- Load (max.): 17.500 N
- Distance to work: 160 mm