For commercial customers only
SPARE PARTS AND REPAIR PRODUCTS FOR WIND TURBINES

Repacor SW-1000 (AB), RAL 7035 light gray, 380g cartridge incl. mixing nozzle

Available in stock

Item number:
WS3602766
Manufacturer number:
1000346
Content:
380 g
Weight:
0.513 kg
Best before date:
09.06.2025
Repacor SW-1000 (AB), RAL 7035 light gray, 380g cartridge incl. mixing nozzle

Repacor SW-1000 (former SikaCor SW 1000 RepaCor, SikaCor® SW-1000 RepaCor) is an an abrasion resistant, innovative 2-pack coating / putty for maintenance or repair of (mechanically) damaged coating areas. Mechanically- and UV-resistant protective coating in easy-to-use-cartridge.

  • Solvent-free, 100% solids, CMR-free
  • Easy-to-use packaging for difficult repair jobs
  • Single layer coating
  • Early water resistance and under water cure
  • Surface tolerant - can be used on many substrates as manually prepared steel, stainless steel, galvanization or aluminium, even on foreign coatings (except siloxane based coatings)
  • Corrosion protection at 500 μm, similar to original in shop coating
  •  Diffusion resistant
  • Plate like glass flakes increase coating strength
  • Impact and abrasion resistant
  • Very high colour retention
  • If required overcotable with 2-pack PU topcoats

RECOMMENDED USE

Can be used as a corrosion protection putty for On and Offshore (wind turbines), for hydraulic engineering (lock gates, steel sheet piles etc.) or other elevated steel structures if a simple, high performance and durable repair coating is required.

PRODUCT TECHNICAL DATA

Volume Solids: 100 ± 2% (ISO 3233-3)
Weight Solids: 100 ± 2%
VOC: 0 g/l determined practically in accordance with Protective Coatings Directive of German Paint Industry Association (VdL-RL 04).
0 g/l calculated from formulation to satisfy EC Solvent Emissions Directive.
0 g/kg calculated from formulation to satisfy EC Solvent Emissions Directive (UK).
Colours: RAL 1023 (colour shade approved according to WSA-TR05), RAL 7035.
Slight colour deviations are possible due to raw material characteristics.
Flash Point: Base: > 200°C, Hardener: > 200°C.
Cleaner/Thinner: Thinner P (for cleaning).
Thoroughly clean tools and equipment immediately after use.
Do not thin Repacor™ SW-1000.
Pack Size: A two component material supplied in a cartridge: Cartridge with 295 g, 12 cartridges per box, 60 boxes on pallet.
Mixing Ratio: 2 parts base to 1 part hardener by volume.
Self mixing due to 2-part cartridges with static mixer.
Density: 1.5 kg/l (may vary with colours).
Shelf Life: 2 years from date of manufacture, stored in originally sealed cartridges in a cool and dry environment.

Recommended Application Methods: Putty, Brush



 

Accessories

In stock
Manual cartridge gun for RepaCor SW-1000 380 g cartridge
Manual cartridge gun for SikaCor SW-1000 RepaCor, 380 g cartridge
Battery cartridge gun for Repacor SW-1000, 380 gr cartridge
Battery cartridge gun for Repacor SW-1000, 380 gr cartridge
In stock
Replacement battery for battery cartridge gun (1,5 Ah) for Repacor SW-1000 (AB), 380 g cartridge
Replacement battery for battery cartridge gun (1,5 Ah) for Repacor SW-1000 (AB), 380 g cartridge
In stock
Summer mixing nozzles for Repacor SW-1000 (AB) 380 g cartridge, (1 bag = 10 nozzles)
Summer mixing nozzles for Repacor SW-1000 (AB) 380 g cartridge, (1 bag = 10 nozzles)
In stock
Winter mixing nozzle for RepaCor SW-1000 (AB) 380 g cartridge, (1 bag = 10 nozzles)
Winter mixing nozzle for RepaCor SW-1000 (AB) 380 g cartridge, (1 bag = 10 nozzles)
In stock
Sika PowerClean cleaning cloths (100 pcs.)
Sika PowerClean cleaning cloths are damp cleaning cloths developed for us at building sites for daily use.
In stock
Thinner P, 5 Ltr.
Solvents respectively thinners are used to dilute paint coating materials and to clean tools, equipment etc.
Thinner P, 25 Ltr.
Solvents respectively thinners are used to dilute paint coating materials and to clean tools, equipment etc.