Upgrade Kit, Lupo, Ø72mm
Ready for shipment in 6 workdays
- Item number:
- WS03602985535
- Manufacturer number:
- KL-0041-441 C
- Weight:
- 2.645 kg
The KL-0041-441 C wheel bearing tool enables the quick and safe installation of wheel hub bearing units - both with and without snap ring - without the risk of damaging them. For this, the KL-0040-2500 hydraulic cylinder, KL-0039-1002 retaining adaptor, KL-0039-1003 retaining adaptor, KL-0039-1920-1 pull spindle (M20) and KL-0040-3009 clamping nut are necessary in addition. Due to the particular design of the wheel hub bearing units, conventional installation by means of a thrust piece under a workshop press or by using standard wheel bearing tools is no longer feasible. This is because with this type of bearing, the outer bearing race is covered by the wheel hub. GEDORE Automotive have come up with a solution to this problem with the specifically designed clamping shells which are mounted against the wheel bearing outer race behind the wheel hub, thus allowing for professional installation of the wheel hub bearing units. The clamping shells feature a securing collar designed to ensure that wheel hub bearing units without snap ring are pressed in completely/into deepened position. For the removal of wheel hub bearing units, the wheel hub puller KL-0041-38 is needed., The special design of the tool ensures that during installation the applied press-in force only acts on the bearing outer ring and not on the wheel hub, This prevents the bearing from being damaged., Without this tool kit, it is nearly impossible to professionally install the wheel hub bearing unit.
Features:
- Country of origin: Germany
- Customs tariff number: 82055980
- Contents (Qty of pieces): 10
- Net weight: 2,6 kg
- 1000 V insulated: No
- VDE certified: No
- Parts list (Text):
1x KL-0041-4400 C - Spannbackenpaar Ø 72 mm
5x KL-0041-3931 - Druckschraube M14x1,5
1x KL-0039-1802 - Zentrierhülse lang Ø 27,4 mm
1x KL-0039-1265 - Druckring Ø 65 mm
1x KL-0039-1674 - Druck-/Stützhülse kurz Ø 74 mm
- Target groups: Automotive
- Suitable for: Compatible with VW, Audi, Seat, and Škoda with a wheel bearing diameter of 72 mm. Installed, for example, on the front axle of VW Polo IV (9N), Fox (5Z); Audi A2 (8Z0); Seat Ibiza III (6L1); Škoda Fabia I (6Y).
- Required accessories: Hydraulic drive (17 t): KL-0040-2500 - Hydraulic cylinder 17 t KL-0215-35 M25 - Hydraulic pump KL-0039-2120 - Pull spindle with quick-clamping nut KL-0039-1002 - Mounting adapter KL-0039-1003 - Mounting adapter
- Outside diameter: 147 mm
- Diameter milled slot of piston rod: 65 mm
- Drive type: hydraulic
- For outer diameter (bearing): 72 mm