ALEXIT® BladeRep® Profile Filler 5
Versatile filling filler for fast and effective repair work on rotor blades. ALEXIT BladeRep Profile Filler 5 has been specially developed for use on GRP substrates. ALEXIT® BladeRep® Profile Filler 5 is a solvent-free two-component polyurethane filler used for filling and lining GRP substrates. This non-porous filler hardens to an easily sandable surface.
ALEXIT® BladeRep® Profile Filler 5 is intended for filling and repairing non-structural defects on rotor blades of wind turbines.
| Mixing ratio* | 4:1 |
| Pot life | 10 minutes |
| Processing | with spatula |
| Yield | ca. 0,37 m2/Set bei 500µm TSD |
| Drying time before sanding | 60 minutes at 23°C |
| * Medium or large containers: see technical data sheet for additional information on mixing ratio and yield |
| Product | Packaging sizes |
| Basic product: ALEXIT® BladeRep® Profile Filler 5 BR5F66 To be used with: |
20 KG/ 4 KG/ 250 gr |
| Hardener: ALEXIT® BladeRep® Hardener 5 BR5F66 |
5 KG/ 1 KG/ 100 gr |
Safety Data Sheet ALEXIT® BladeRep® Profile Filler 5
Safety Data Sheet ALEXIT® BladeRep® Hardener 5
