Repacor SW-1000 (AB), RAL 7035 light gray, 380g cartridge incl. mixing nozzle

Repacor SW-1000 (former SikaCor SW 1000 RepaCor, SikaCor® SW-1000 RepaCor) is an an abrasion resistant, innovative 2-pack coating / putty for maintenance or repair of (mechanically) damaged coating areas. Mechanically- and UV-resistant protective coating in easy-to-use-cartridge.

• Solvent-free, 100% solids, CMR-free
• Easy-to-use packaging for difficult repair jobs
• Single layer coating
• Early water resistance and under water cure
• Surface tolerant - can be used on many substrates as manually prepared steel, stainless steel, galvanization or aluminium, even on foreign coatings (except siloxane based coatings)
• Corrosion protection at 500 μm, similar to original in shop coating
•  Diffusion resistant
• Plate like glass flakes increase coating strength
• Impact and abrasion resistant
• Very high colour retention
• If required overcotable with 2-pack PU topcoats

RECOMMENDED USE

Can be used as a corrosion protection putty for On and Offshore (wind turbines), for hydraulic engineering (lock gates, steel sheet piles etc.) or other elevated steel structures if a simple, high performance and durable repair coating is required.

PRODUCT TECHNICAL DATA

Volume Solids: 100 ± 2% (ISO 3233-3)
Weight Solids: 100 ± 2%
VOC: 0 g/l determined practically in accordance with Protective Coatings Directive of German Paint Industry Association (VdL-RL 04).
0 g/l calculated from formulation to satisfy EC Solvent Emissions Directive.
0 g/kg calculated from formulation to satisfy EC Solvent Emissions Directive (UK).
Colours: RAL 1023 (colour shade approved according to WSA-TR05), RAL 7035.
Slight colour deviations are possible due to raw material characteristics.
Flash Point: Base: > 200°C, Hardener: > 200°C.
Cleaner/Thinner: Thinner P (for cleaning).
Thoroughly clean tools and equipment immediately after use.
Do not thin Repacor™ SW-1000.
Pack Size: A two component material supplied in a cartridge: Cartridge with 295 g, 12 cartridges per box, 60 boxes on pallet.
Mixing Ratio: 2 parts base to 1 part hardener by volume.
Self mixing due to 2-part cartridges with static mixer.
Density: 1.5 kg/l (may vary with colours).
Shelf Life: 2 years from date of manufacture, stored in originally sealed cartridges in a cool and dry environment.

Recommended Application Methods: Putty, Brush