No results were found for the filter!
For more information about products, please log in or request the product via the button below | Register here...
On stock
3M Hand Applicator for 3M W8607 Protection... 3M Hand Applicator for 3M W8607 Protection Tape, Blue (Hard)
On stock
Mixing nozzle for Araldite 2021-1 & 2022-1 50... Mixing nozzle for Araldite 2021-1 & 2022-1 50 ml cartridge, (1 bag = 10 nozzles)
Content 10 Stück
On stock
Mixing nozzles for ACRALOCK SA 1-05 NAT 50 ml... Mixing nozzles for ACRALOCK SA 1-05 NAT 50 ml cartridge, (1 bag = 10 mixing nozzles)
Content 10 Stück
On stock
Mixing nozzles for ACRALOCK SA 1-15 NAT 50 ml... Mixing nozzles for ACRALOCK SA 1-15 NAT 50 ml cartridge, (1 bag = 10 mixing nozzles)
Content 10 Stück
On stock
Mixing nozzle for Araldite 2022-1, 50 ml... Mixing nozzle for Araldite 2022-1, 50 ml cartridge, (1 bag = 10 nozzles)
Content 10 Stück
On stock
Mixing nozzle for Araldite 2051 50 ml... Mixing nozzle for Araldite 2051 50 ml cartridge, (1 bag = 10 nozzles)
Content 10 Stück
On stock
Windmastic Topcoat HSX RAL 7035 Repair Kit, 0,5... Windmastic Topcoat HSX is a matt weathering resistant polyurehane topcoat for use on wind turbine rotor blades.
Content 0.6 Liter
On stock
On stock
AMPREG 31 R/H FAST 4.66 KG kit AMPREG 31 R/H FAST 4.66 KG Pack
EPOXY WET LAMINATING SYSTEM
EPOXY WET LAMINATING SYSTEM
- Same 100:26 resin to hardener mix ratio by weight across range of hardener speeds
- Viscosity optimised for good fabric wet-out and drainage resistance
- Good cure progression from ambient only cures
- Tough resin matrix giving good laminate mechanical properties
- DNV-GL Certified formats available & Lloyds Register Certification in progress
- Low Toxicity Hardener Formulations
- Improved Hazard Labelling
- CMR & SVHC** Free
- Reduced Environmental Hazards
- Formulated with Gurit LRT (Light Reflective Technology) as standard
Safety data sheet Ampreg 31 Resin_EN
Safety data sheet Ampreg 3X Fast Hardener_EN
Content 4.66 Kilogramm
On stock
AMPREG 30 R/H FAST 1.26KG Pack AMPREG 30 R/H FAST 1.26KG pack. This is the follow-up material for: AMPREG 21 Harz incl. fast hardener 1,33 kg set
Content 1.26 Kilogramm
On stock
Airex C70.55 panels '1/1' 019,0 mm, 1225 x 575 mm Airex C70.55 panels '1/1' 019,0 mm, 1225 x 575 mm
Content 0.7043 Quadratmeter
On stock
Last viewed wind turbine spare parts and repair material