Piezas de recambio y material de reparación para aerogeneradores y palas de aerogeneradores

Mixing nozzle for Araldite 2021-1 & 2022-1 50 ml cartridge, (1 bag = 10 nozzles)

Boquillas de mezcla para el cartucho ACRALOCK SA 1-05 NAT 50 ml, (1 bolsa = 10 boquillas de mezcla)

Boquillas de mezcla para el cartucho ACRALOCK SA 1-15 NAT 50 ml, (1 bolsa = 10 boquillas de mezcla)

Mixing nozzle for Araldite 2022-1, 50 ml cartridge, (1 bag = 10 nozzles)

Mixing nozzle for Araldite 2051 50 ml cartridge, (1 bag = 10 nozzles)

Windmastic Topcoat HSX is a matt weathering resistant polyurehane topcoat for use on wind turbine rotor blades.

Bergolin LEP 6D2900 2-component edge protection 0.504 kg cartridge RAL7038

AMPREG 31 R/H FAST 1.26 KG Pack

Use 3M Nozzles for 50 ml Cartridges for a well-mixed, ready to use product after equalisation. Our clear mixing nozzles fit into all 3M 50ml duo-cartridges and are designed to combine two component materials.

Kema RTF-169 Penetrant with PTFE, Spray, 500 ml

RGA-1100 and RG-1100 are superior anti-seize and extreme pressure lubricants formulated to protect metal parts against rust, corrosion and seizure.

AMPREG 31 R/H FAST 4.66 KG Pack

EPOXY WET LAMINATING SYSTEM

• Same 100:26 resin to hardener mix ratio by weight across range of hardener speeds
• Viscosity optimised for good fabric wet-out and drainage resistance
• Good cure progression from ambient only cures
• Tough resin matrix giving good laminate mechanical properties
• DNV-GL Certified formats available & Lloyds Register Certification in progress
• Low Toxicity Hardener Formulations
• Improved Hazard Labelling
• CMR & SVHC** Free
• Reduced Environmental Hazards
• Formulated with Gurit LRT (Light Reflective Technology) as standard

 

Safety data sheet Ampreg 31 Resin_EN
Safety data sheet Ampreg 3X Fast Hardener_EN