Plexus MA 320 Adhesive & Activator white, 380 ml cartridge incl. mixing nozzle
Disponible en stock
- Nº de artículo:
- WS03900050
- Número de fabricante:
- 01913205556
- Contenido:
- 400 mL
- Compra mínima:
- 2
- Peso:
- 0.4 kg
- Fecha de caducidad:
- 05.12.2025
Plexus MA 320 Adhesive & Activator white, 380 ml cartridge incl. mixing nozzle
Plexus® MA320 White is a two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. Combined at a 10:1 ratio, Plexus MA320 is an excellent choice for composite bonding applications in the transportation, marine, wind energy, and Engineering construction industries because of its high strength and durability. Additionally, it generally requires minimal surface preparation. MA320 also provides superior toughness, even at low temperatures. Plexus MA320 is available in white, off-white (cream) or black colors and is supplied in ready-to-use cartridges, 5- gallon (20-liter) pails, or 50-gallon (200-liter) drums to be dispensed as a non-sagging gel.
Application
Surface Preparation - Plexus adhesives typically require little or no surface preparation, but are dependent on the material and degree of contamination in the bonding area. For optimal performance, ITW PP recommends surfaces to be free of grease, dirt, and other contaminants.
Other surfaces should have the same considerations. ITW PP recommends customers test to determine the optimal preparation for their materials to ensure suitability.
Application
Surface Preparation - Plexus adhesives typically require little or no surface preparation, but are dependent on the material and degree of contamination in the bonding area. For optimal performance, ITW PP recommends surfaces to be free of grease, dirt, and other contaminants.
- Plastics and coated metals - wipe with a dry rag or a light solvent may be sufficient.
- Raw metal - wipe with a dry rag or a light solvent may be sufficient.
- Metals may be affected by the degree of oxidation, scaling, fluids or other contaminants.
- Composites - dust free surfaces can be bonded as is or may require light abrasion to remove mold releases, or to increase the surface area.
Other surfaces should have the same considerations. ITW PP recommends customers test to determine the optimal preparation for their materials to ensure suitability.
Datasheets
Accesorios
En stock
Manual cartridge gun for Plexus MA 320, 380 ml cartridge
Manual cartridge gun for Plexus MA 320, 380 ml cartridge