HACA Fall Protection Runner Multisafe with opening mechanism, three catch functions, 0529745000
Disponible à la vente dans 10 jours ouvrables
- Numéro d'article:
- WS3602363
- Poids :
- 1.8 kg
HACA Fall Protection Runner Multisafe with opening mechanism, three catch functions, 0529745000
Excellent running characteristics
One-hand operation
Saving of removal flap and notching possible
Features 3 catch functions: 1st catch function: In case of vertical fall, the 1st catch function catches 2. catch function: Due to an automatic horizontal pull limitation, the device catches when falling backwards (fall-back and sit-back) 3. catch function: A centrifugal brake triggers a braking pulse at high fall speed and activates catch function 1.
Approved for persons from 40 kg to 150 kg
At 5 kN, the maximum impact force required by DIN EN 353-1 with a 100 kg steel weight is undercut by 17
Maximum safety, as the runner is fully usable again after a fall load. This means that an immediate subsequent fall is also secured
The snap hook is equipped with a swivel swivel
The new carabiner installed since the end of 2016 brings a weight saving of ~ 10 % and has a larger receiver, for details see E.06
Particularly smooth-running, thus no fatigue and low load when climbing
Very good running properties due to roller guides on all sides and long center distances
Contact with the guide rail is via ball bearing rollers
Correct insertion into the fall protection rail is forcibly ensured
Can be used up to 15° back position and 20° side position
One-hand operation
Saving of removal flap and notching possible
Features 3 catch functions: 1st catch function: In case of vertical fall, the 1st catch function catches 2. catch function: Due to an automatic horizontal pull limitation, the device catches when falling backwards (fall-back and sit-back) 3. catch function: A centrifugal brake triggers a braking pulse at high fall speed and activates catch function 1.
Approved for persons from 40 kg to 150 kg
At 5 kN, the maximum impact force required by DIN EN 353-1 with a 100 kg steel weight is undercut by 17
Maximum safety, as the runner is fully usable again after a fall load. This means that an immediate subsequent fall is also secured
The snap hook is equipped with a swivel swivel
The new carabiner installed since the end of 2016 brings a weight saving of ~ 10 % and has a larger receiver, for details see E.06
Particularly smooth-running, thus no fatigue and low load when climbing
Very good running properties due to roller guides on all sides and long center distances
Contact with the guide rail is via ball bearing rollers
Correct insertion into the fall protection rail is forcibly ensured
Can be used up to 15° back position and 20° side position