SikaPrimer-210 C225, can 250 ml.

Sika® Primer-210 is a colorless to slightly yellowish solvent-based primer that reacts with moisture to form a thin film. layer (film-forming). This layer acts as a bonding agent between the substrate and the adhesive. Sika® Primer-210 has been specially developed for the pretreatment of bonding surfaces in combination with Sikaflex® adhesives.

Sika® Primer-210 is used to improve adhesion to various metals, such as aluminum, steel and non-ferrous metals. This primer can also be used to improve adhesion of Sikasil® sealants and adhesives. Follow manufacturer's recommendations before using Sika® Primer-210 on materials subject to stress cracking. Preliminary tests must be carried out with original materials to avoid stress cracking. This product is suitable for experienced users only. To ensure adhesion and material compatibility, preliminary tests must be carried out with original materials under the relevant conditions.

IMPORTANT NOTE
Sika® Primer-210 reacts with moisture. To maintain product quality, it is important to reseal the can with the inner plastic lid immediately after each use. When the pretreatment is completely finished, close the can with the screw cap.
After the first opening, the primer should be discarded after approx. one month if used regularly, or after 2 months if the can is opened infrequently.
months if the can is opened infrequently. Do not use primer that has gelled or separated or shows increased viscosity.
Do not dilute or mix Sika® Primer-210 with other substances. When used on transparent or translucent substrates such as glass, plastics, etc., adequate UV protection of the bonding surface is mandatory.