Products from 3M Deutschland GmbH
3M Deutschland GmbH has been a supply partner of WINDSOURCING.COM for rotor blade repair products and other wind turbine-related products for many years:
- 3M erosion protection for rotor blades
- 3M™ Wind Protection Tapes
- W2600 3M™ Wind Protection Tape Edge Sealer
- W9900 3M™ Wind Tape and Residue Remover (TARR) W9900
- W9910 3M™ Wind Tape Adhesion Promoter W9910
- 3M™ Wind Blade Protection Coatings and Accessories
- 3M™ Wind Blade Protection Coating W4600 and W4601
- 3M™ Wind Structural Adhesives and Accessories
- 3M Acryclic Foam Tapes and 3M™ Premium Electrical Tapes
No results were found for the filter!
3M™ V5 Series Helmet Linkage System, V5 The V5 helmet linkage system can be mounted onto the 3M™ G3000 to allow the attachment of a range of faceshields.
3M™ 91-AH 20-5N Heatshrink Kit 3M™ 91-AH 20-5N is a heatshrink low voltage inline joint kit for crimp connectors, designed for 5-core non shielded, non armoured, low voltage polymeric insulated energy cables up to 0.6/1 kV according to HD603 and IEC 60502-1. Shrink ratio is up to 4.5:1, min. shrink temperature is 135°C, operating temperature is -55°C to +130°C. Cable cross section range is 5x1,5-5x6 mm². RoHS compliant, halogen free. Good electrical insulation, moisture, mechanical and chemical resistance.
3M™ 91-AH 21-5N Heatshrink Kit 3M™ 91-AH 21-5N is a heatshrink low voltage inline joint kit for crimp connectors, designed for 5-core non shielded, non armoured, low voltage polymeric insulated energy cables up to 0.6/1 kV according to HD603 and IEC 60502-1. Shrink ratio is up to 4.5:1, min. shrink temperature is 135°C, operating temperature is -55°C to +130°C. Cable cross section range is 5x6-5x16 mm². RoHS compliant, halogen free. Good electrical insulation, moisture, mechanical and chemical resistance.
Content 1
3M™ 91-AH 21N Heatshrink Kit 3M™ 91-AH 21-N is a heatshrink low voltage inline joint kit for crimp connectors, designed for 3-core and 4-core non shielded, non armoured, low voltage polymeric insulated energy cables up to 0.6/1 kV according to HD603 and IEC 60502-1. Shrink ratio is up to 4.5:1, min. shrink temperature is 135°C, operating temperature is -55°C to +130°C. Cable cross section range is 4x6-4x256 mm². RoHS compliant, halogen free. Good electrical insulation, moisture, mechanical and chemical resistance.
3M™ 91-AH 22N Heatshrink Kit 3M™ 91-AH 22-N is a heatshrink low voltage inline joint kit for crimp connectors, designed for 3-core and 4-core non shielded, non armoured, low voltage polymeric insulated energy cables up to 0.6/1 kV according to HD603 and IEC 60502-1. Shrink ratio is up to 4.5:1, min. shrink temperature is 135°C, operating temperature is -55°C to +130°C. Cable cross section range is 4x25-4x50 mm². RoHS compliant, halogen free. Good electrical insulation, moisture, mechanical and chemical resistance.
3M™ 91-AH 23N Heatshrink Kit 3M™ 91-AH 23-N is a heatshrink low voltage inline joint kit for crimp connectors, designed for 3-core and 4-core non shielded, non armoured, low voltage polymeric insulated energy cables up to 0.6/1 kV according to HD603 and IEC 60502-1. Shrink ratio is up to 4.5:1, min. shrink temperature is 135°C, operating temperature is -55°C to +130°C. Cable cross section range is 4x25-4x95 mm². RoHS compliant, halogen free. Good electrical insulation, moisture, mechanical and chemical resistance.
3M™ 91-AH 24N Heatshrink Kit 3M™ 91-AH 24-N is a heatshrink low voltage inline joint kit for crimp connectors, designed for 3-core and 4-core non shielded, non armoured, low voltage polymeric insulated energy cables up to 0.6/1 kV according to HD603 and IEC 60502-1. Shrink ratio is up to 4.5:1, min. shrink temperature is 135°C, operating temperature is -55°C to +130°C. Cable cross section range is 4x35-4x150 mm². RoHS compliant, halogen free. Good electrical insulation, moisture, mechanical and chemical resistance.
3M™ 91-AH 25N Heatshrink Kit 3M™ 91-AH 25-N is a heatshrink low voltage inline joint kit for crimp connectors, designed for 3-core and 4-core non shielded, non armoured, low voltage polymeric insulated energy cables up to 0.6/1 kV according to HD603 and IEC 60502-1. Shrink ratio is up to 4.5:1, min. shrink temperature is 135°C, operating temperature is -55°C to +130°C. Cable cross section range is 4x95-4x300 mm². RoHS compliant, halogen free. Good electrical insulation, moisture, mechanical and chemical resistance.
3M™ 91-AHA-21S Heatshrink Inline Joint Kit... 3M™ 91-AHA series is used for jointing low-voltage polymeric insulated shielded and armoured cables. The kits include inner tubes, outer tubes, constant force springs and a copper sleeve for armour continuity, as well as an installation drawing.
3M™ 91-AHA-22N Heatshrink Inline Joint Kit... 3M™ 91-AHA series is used for jointing low-voltage polymeric insulated shielded and armoured cables. The kits include inner tubes, outer tubes, constant force springs and a copper sleeve for armour continuity, as well as an installation drawing.
3M™ 91-AHA 23N Warm-shrink connection kit with... 3M™ 91-AHA -N Series are heatshrink low voltage inline joint kits for crimp connectors, designed for 4-core shielded or armoured, low voltage polymeric insulated energy cables up to 0.6/1 kV according to HD603 and IEC 60502-1. Shrink ratio is up to 4.5:1, min. shrink temperature is 135°C, operating temperature is -55°C to +130°C. RoHS compliant, halogen free. Good electrical insulation, moisture, mechanical and chemical resistance.
3M™ 91-AHA-24S Heatshrink Inline Joint Kit... 3M™ 91-AHA-24S Suitable for Cable Types: XLPE/PVC Insulation, Steel Wire Armour Cables
Last viewed wind turbine spare parts and repair material